SC503 Chassis Manual
A-2
Power Cable Extenders
Number of Pins
Cable Part #
Length
24 pin
CBL - 0042
7.9”(20 CM)
20 pin
CBL - 0059
7.9”(20 CM)
8 pin
CBL - 0062
7.9”(20 CM)
4 pin
CBL - 0060
7.9”(20 CM)
Front Panel to the Motherboard
The SC503 chassis includes a cable to connect the chassis front panel to the
motherboard. If your motherboard uses a different connector, use the following list
to find a compatible cable.
The SNK-P00A4 active heatsink may only be used on specific motherboards, due
to its larger 4" x 4" size.
This is particularly important in systems utilizing Intel
Celeron 400 series platforms.
To ascertain which heatsink is appropriate for your
motherboard, refer to the Supermicro Web site at http://www.supermicro.com.
Extending Power Cables
Although Supermicro chassis are designed with to be efficient and cost-effective,
some compatible motherboards have power connectors located in different areas.
To use these motherboards you may have to extend the power cables to the mother
boards. To do this, use the following chart as a guide.
1U Active Heatsink (SNK-P0032A4)
It is
critical
to choose the correct heatsink for your motherboard, that will fit in the
SC503 chassis.
Recommended heatsink: Intel Celeron 400 seriew (35W) platform: Active heatsink
SNKP0032A4
Figure A-2: SNK-P00A4 Active Heatsink
