Supero C9Z390-CG-IW, User Manual

Page: 77 / 115

Chapter 4: UEFI BIOS
4-15
IOLatency_CH1_DIMM0 - 4
DllBwEn[0] - 0
DllBwEn[1] - 1
DllBwEn[2] - 2
DllBwEn[3] - 3
 Graphics OverClocking
RC6(Render Standby)
Use this feature to enable Render Standby support. The options are
Disabled and
Enabled .
GT OverClocking Frequency
Enter a value for the overclocked RP0 frequency (in multiples of 50 MHz)
in the GT domain. The default is
0 .
GT Voltage Mode
This feature controls the voltage mode in the GT domain. The options
are Adaptive and Override.
GT Extra Turbo Voltage
Enter a value for the extra turbo voltage (in mV) that will be applied
while GT is operating in turbo mode. The default is
0 .
GT Voltage Offset
Enter a value for the offset voltage (in mV) that will be applied to the
GT domain. The default is
0 .
Offset Prefix
Use this feature to set the prefix value as a positive (+) or a negative
(-). The options are “
+ ” and “-”.
GT OverClocking Frequency
Enter a value for the overclocked RP0 frequency (in multiples of 50 MHz)
in the GT Unslice domain. The default is
0 .
GT Voltage Mode
This feature controls the voltage mode in the GT Unslice domain. The
options are Adaptive and Override.
GT Extra Turbo Voltage
Enter a value for the extra turbo voltage (in mV) that will be applied
while GT is operating in turbo mode. The default is
0 .