Supero C9Z390-CG-IW, User Manual

Page: 32 / 115

2-8
Supermicro C9Z390-CG-IW Motherboard User’s Manual
JD1
JWD1
JCMOS
JL1
JPME2
JSD1
LED2 LED5
I-SATA1 I-SATA0
JPW1
JRF1
JVR1
CPU
LED
DIMM LED VGA LED BOOT LED
JPW2
LED1
JF1
JP1
C C
A A
A
C
C C
A A
DESIGNED IN USA REV:1.01
BAR CODE
C9Z390-CG-IW
MAC CODE
C C
A A
CPU SLOT7 PCI-E 3.0 X16
HD AUDIO
USB 2/3(3.0)
PCI-E M.2-M1
2280
MH12
USB 8(3.1)
USB 6/7(3.1)
PCI-E M.2-E1
USB 4/5(3.1)
B1
HDMI/DP
DIMMA1
DIMMB1
SYS_FAN1
JRLED1
CPU_FAN1
KB/MOUSE
USB 0/1(3.0)
I-SATA3 I-SATA2
LAN1
AUDIO FP
WiFi+BT
PCH
2-4 Installing DDR4 Memory
Note : Check the Supermicro website for recommended memory
modules.
Attention! Exercise extreme care when installing or removing
DIMM modules to prevent any possible damage.
DIMM Installation
1.
Insert the desired number of
DIMMs into the memory slots,
starting with DIMMA1, and then
DIMMB1. For the system to
work properly, please use the
memory modules of the same
type and speed.
Release Tabs
Notches
2. Push the release tab outwards
on the end of the DIMM slot to
unlock it.
Press both notches
straight down into
the memory slot.
3. Align the key of the DIMM mod-
ule with the receptive point on the
memory slot.
4. Align the notches on both ends of
the module against the receptive
points on the ends of the slot.
5.
Use two thumbs together to press
the notches on both ends of the
module straight down into the slot
until the module snaps into place.
6.
Press the release tab to the lock
position to secure the DIMM module
into the slot.
Removing Memory Modules
Reverse the steps above to remove the
DIMM modules from the motherboard.