Supero C9Z390-CG-IW, User Manual

Page: 107 / 115

Appendix A: POST Error Beep Codes
A-1
Appendix A
BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed
each time the system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to
continue with bootup. The error messages normally appear on the screen.
Fatal errors will not allow the system to continue to bootup. If a fatal
error occurs, you should consult with your system manufacturer for
possible repairs.
These fatal errors are usually communicated through a series of audible
beeps. The numbers on the fatal error list correspond to the number of
beeps for the corresponding error.
A-1 BIOS Error Beep Codes
Note : An external speaker must be connected to the motherboard
in order to hear the BIOS Error Beep Codes.
BIOS Error Beep Codes
Beep Code/LED Error Message Description
1 beep Refresh Circuits have been reset.
(Ready to power up)
5 short beeps + 1
long beep
Memory error No memory detected in
the system
5 short beeps Display error System display error
OH LED On System OH System Overheat