Supero C7X58, User Manual

Page: 71 / 101

Chapter 4: AMI BIOS
4-5
Wait For 'F1' If Error
Select Enabled to force the system to wait until the 'F1' key is pressed if an error
occurs. The options are Disabled and
Enabled
.
Hit 'Del' Message Display
Select Enabled to display: "Press DEL to run Setup" during POST. The options
are
Enabled and Disabled.
Watch Dog Function
Select Enabled to enable the Watch Dog Timer which will reboot the system when
it is inactive for more than 5 minutes. The options are Enabled and
Disabled.
Power Button Function
This feature controls how the system shuts down when the power button is
pressed. Select 4-Second Override to force the user to press and hold the Power
Button for 4 seconds before the system turns off. Select Instant Off if you want
the system to instanty power off when the Power Button is pressed. The options
are 4 Second Override and
Instant Off .
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for
the system power to remain off after a power loss. Select Power-On for the system
power to be turned on after a power loss. Select Last State to allow the system to
resume its last state before a power loss. The options are Power-On, Power-Off
and Last State .
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function.
When this item is set to Enabled, the ROM BIOS of the host adaptors will
"capture" Interrupt 19 at boot and allow the drives that are attached to these
host adaptors to function as bootable disks. If this item is set to Disabled, the
ROM BIOS of the host adaptors will not capture Interrupt 19, and the drives
attached to these adaptors will not function as bootable devices. The options
are Enabled and
Disabled.

Processor & Clock Options
When you first enter the Processor and Clock Options, the current
processor and clock configuration is displayed. Below it are the different
options that can be modified: