Supero C7X58, User Manual

Page: 58 / 101

2-36
X8SAX/C7X58 User's Manual
REV 1.01
X8SAX
2-9 Serial ATA and Floppy Drive Connections
Note the following conditions when connecting the Serial ATA and floppy disk drive
cables:
• Be sure to use the correct cable for each connector. Refer to Page 1-1 for cables
that came with your shipment.
• A red mark on a wire indicates the location of pin 1.
A
SATA Connectors
Six Serial ATA (SATA) connectors (I-SATA
0~5) are located on the motherboard
to provide serial link connections. Se-
rial Link connections provide faster data
transmission than those of the traditional
Parallel ATA. These SATA connectors
are supported by the Intel ICH10R Chip
(South Bridge). See the table on the right
for pin definitions.
SATA Connectors
Pin Definitions
Pin# Signal
1 Ground
2 SATA_TXP
3 SATA_TXN
4 Ground
5 SATA_RXN
6 SATA_RXP
7 Ground
B
A. I-SATA 0~1
B. I-SATA 2~3
C. I-SATA 4~5
C