Supero C7H170-M, User Manual

Page: 98 / 157

4-26
Supermicro C7Z170-M/C7H170-M Motherboard User’s Manual
Ring Max OC Ratio
This option sets the maximum overclocking ratio for the RING domain.
Press "+" or "-" on your keyboard to change the value.
Ring Min OC Ratio
This option sets the minimum overclocking ratio for the RING domain.
Press "+" or "-" on your keyboard to change the value.
Uncore Voltage Offset
Use this feature to set the uncore domain Voltage Offset value from
-1000mV to +1000mV. Enter
0 to use the manufacture default value.
Press "+" or "-" on your keyboard to change the value.
Offset Prefix
Use this feature to set the offset value as positive or negative. The op-
tions are
+ or -.
PCH Voltage
Use this feature to trim the PCH Voltage. Select from these values: 1.00V ,
1.05V, 1.10V, 1.15V, 1.20V, 1.25V, and 1.30V.
CPU PLL Voltage
Use this feature to trim the CPU PLL Voltage. Select from these values:
1.20V , 1.25V, 1.30V, 1.35V, 1.40V, 1.45V, and 1.50V.
CPU_IO Voltage
Use this feature to calibrate the CPU I/O Voltage. Select from these val-
ues:
0.975V , 1.15V, 1.30V, and 1.50V.
Load Line Calibration
Load line calibration is vDroop, which is the tendency for a CPU's vCore
to drop when going from an idle state to a load state. Enable this feature
to reduce vDroop. The options are Disabled and
Enabled .
VRM Total Current Limit Capability
Use this feature to set the CPU integrated voltage regulator when under
extreme high load for VRM total current limit. The options are
100% ,
110%, 120%, 130%, 140%, 150%, 160%, 170%, 180%, 190%, and
200%.