Supero C7H170-M, User Manual

Page: 132 / 157

4-60
Supermicro C7Z170-M/C7H170-M Motherboard User’s Manual
PCIe/PCI/PnP Configuration
PCH SLOT1 PCI-E 3.0 X1 OPROM,
PCH SLOT2 PCI-E 3.0 X4 OPROM,
CPU SLOT3 PCI-E 3.0 X16 OPROM
Select Disabled to deactivate the selected slot, Legacy to activate the
slot in legacy mode and EFI to activate the slot in EFI mode. The op-
tions are Disabled,
Legacy , and UEFI.
Onboard LAN Option ROM Type
Select the type of option ROM installed. The options are Legacy and
UEFI.
Onboard LAN1 Option ROM
Select PXE (Preboot Execution Environment) to boot the computer
using a PXE device installed in a LAN port specified. Select Disabled
to prevent system boot using a device installed in a LAN port. The
options are Disabled and
PXE .
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI
(Unified Extensible Firmware Interface) for network stack support. The
options are Disabled and Enabled. If this feature is enabled, the two
features below are available.
Ipv4 PXE Support
Select Enabled to enable Ipv4 PXE (Preboot Execution Environ-
ment) for boot support. If this feature is set to Disabled, Ipv4
PXE boot option will not be supported. The options are Disabled
and
Enabled .
Ipv6 PXE Support
Select Enabled to enable Ipv6 PXE (Preboot Execution Environ-
ment) for boot support. If this feature is set to Disabled, Ipv6
PXE boot option will not be supported. The options are Disabled
and
Enabled.