Supero C7B250-CB-ML User Manual Download Page 69

Page: 69 / 121

Chapter 4: BIOS

4-3

4-2 System Information

The System Information Panel displays the motherboard's configuration.

The following information among others is displayed in this section:

•

Motherboard Model Name -

C7B250-CB-ML.

•

Version -

this feature displays the BIOS version number.

•

Build Date and Time -

displays the BIOS build date and time.

•

CPU -

displays the CPU type speed, stepping, etc

•

CPU Fan Data -

displays sensor type, temperature, speed

System Date

Click on the date to open the setup fields. This feature sets and displays

the system date. Click the up and down arrows to adjust the date.

System Time

Click on the time to open the setup fields. This feature sets and displays

the system time. Click the up and down arrows to adjust the system time.

Summary of Contents for C7B250-CB-ML


























































































































Search results

Summary of Contents for C7B250-CB-ML

Reviews:

Related manuals for C7B250-CB-ML

Brands by name

Popular brands

Supero C7B250-CB-ML, User Manual

Search results

Summary of Contents for C7B250-CB-ML

Reviews:

Related manuals for C7B250-CB-ML

Brands by name

Popular brands