Supero C7B250-CB-ML, User Manual

Page: 111 / 121

Appendix A: POST Error Beep Codes
A-1
Appendix A
BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed
each time the system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to
continue with bootup. The error messages normally appear on the screen.
Fatal errors will not allow the system to continue to boot up. If a fa-
tal error occurs, you should consult with your system manufacturer for
possible repairs.
These fatal errors are usually communicated through a series of audible
beeps. The numbers on the fatal error list correspond to the number of
beeps for the corresponding error.
Connect an external speaker to hear the beep codes.
A-1 BIOS Error Beep Codes
BIOS Error Beep Codes
Beep Code/LED Error Message Description
1 beep Refresh Circuits have been reset.
(Ready to power up)
5 short beeps + 1
long beep
Memory error No memory detected in the
system
5 short beeps Display error System display error
OH LED On System OH System Overheat