Chapter 4: BIOS
4-39
•
VCPU_IO
•
VCPU_GT
•
VDIMM_2.5
•
PCH 1.0V
•
3.3V_DL
•
VSB
•
3.3VCC
•
VBAT
•
VCPU_STPLL
Fan Control
Fan Speed Control Mode
This feature allows the user to decide how the system controls the speeds
of the onboard fans. The CPU temperature and the fan speed are cor-
relative. When the CPU on-die temperature increases, the fan speed will
also increase for effective system cooling. Select "Full Speed" to allow
the onboard fans to run at full speed (of 100% Pulse Width Modulation
Duty Cycle) for maximum cooling. This setting is recommended for special
system configuration or debugging. Select "Stable" for the onboard fans
to run at 50% of the Initial PWM Cycle in order to balance the needs
between system cooling and power saving. This setting is recommended
for regular systems with normal hardware configurations. Select "Quiet"
to optimize for minimal fan noise and Custom to enter user-specific set
-
tings. The options are
Quiet
, Stable, Full Speed and Customize.
When "Customize" is selected above, the settings for
CPU_FAN1 Con-
trol, SYS FAN1/FAN2 Control
will appear and can be configured.
Summary of Contents for C7B250-CB-ML
