Supero AS 4040C-TR, User Manual

Page: 37 / 104

Chapter 5: Advanced Serverboard Setup
5-3
5-3 Processor and Heatsink Installation
!
Installing the Processor (must populate all four CPU sockets)
1. Lift the lever on CPU socket #1 until
it points straight up.
2. Use your thumb and your index fi n-
ger to hold the CPU. Locate pin 1 on
the CPU socket and pin 1 on the CPU.
Both are marked with a triangle.
3. Align pin 1 of the CPU with pin 1
of the socket. Once aligned, carefully
place the CPU into the socket. Do not
drop the CPU on the socket, move the
CPU horizontally or vertically or rub the
CPU against the socket or against any
pins of the socket, which may damage
the CPU and/or the socket .
Triangles
Exercise extreme caution when handling and installing the proces-
sor. Always connect the power cord last and always remove it be-
fore adding, removing or changing any hardware components.
4. With the CPU inserted into the
socket, inspect the four corners of the
CPU to make sure that it is properly
installed and fl ush with the socket.