Chapter 7: BIOS
7-5
Floppy/IDE/SATA Confi guration
Floppy A
Move the cursor to these fi elds via up and down <arrow> keys to select the
fl oppy type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB
3½",
1.44 MB 3½”
, and 2.88 MB 3½".
Floppy B
Move the cursor to these fi elds via up and down <arrow> keys to select the
fl oppy type. The options are
Disabled
, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB
3½", 1.44 MB 3½”, and 2.88 MB 3½".
Onboard Floppy Controller
Use this setting to
Enable
or Disable the onboard fl oppy controller.
HT1000 S-ATA
Use this setting to
Enable
or Disable the SATA controller in the HT1000
chipset.
S-ATA Mode
Use this setting to specify the SATA mode: either
IDE
or MMIO.
Onboard PCI IDE Controller
The following options are available to set the IDE controller status: Disabled will
disable the controller.
Primary
will enable the primary IDE controller. There is
no Secondary option since only one IDE slot is provided on the board.
Primary IDE Master/Slave
Highlight one of the two items above and press <Enter> to access the submenu
for that item.
Type
Select the type of device connected to the system. The options are Not In-
stalled,
Auto
, CDROM and ARMD.
Summary of Contents for AS-1011S-MR2
