Supero AS-1011S-MR2, User Manual

Page: 82 / 98

7-12
AS1011S-MR2 User's Manual
Remote Access Confi guration
Remote Access
Use this setting to Enable or Disable remote access. If Enabled is selected,
you can select a Remote Access type.
System Health Monitor
CPU Overheat Temperature
Use the "+" and "-" keys to set the CPU temperature threshold to between 65
o
and 90
o
C. When this threshold is exceeded, the overheat LED on the chas-
sis will light up and an alarm will sound. The LED and alarm will turn off once
the CPU temperature has dropped to 5 degrees below the threshold set. The
default setting is 72
o
C .
The other items in the submenu are all systems monitor displays for the follow-
ing information:
CPU Temperature, System Temperature, CPU Vcore, +3.3V, +5 Vin, +12Vin,
+5V standby and battery voltage.
Fan Speed Control Modes
This feature allows the user to determine how the system will control the speed of
the onboard fans. Select "Workstation" if your system is used as a Workstation.
Select "Server" if your system is used as a Server. Select "Disable" to disable
the fan speed control function to allow the onboard fans to continuously run at
full speed (12V). The options are 1) Disable, Full Speed 2) Server Mode and
3) Workstation Mode.
FAN1 Speed through FAN5 Speed
The speeds of the onboard fans (in rpm) are displayed here.