3-50
AOC-SIML1U-3B(+)/AOC-SIM1U-3D User's Guide
i./ii. Local Drive List
: The box displays a list of local drives available for remote
access. Select from the list a local drive that you want to make accessible for a
remote server.
iii. Refresh
: Click this button to refresh the local drive list.
iv. Write Support
: Check this button to allow the remote operating system to have
write access to the drive that you have selected. This function allows a user to alter,
overwrite, erase and destroy data stored in the drive selected. This feature should
only be used with non-critical data. When "Write Support" is checked, the warning
message as shown below will display. Read the warning message carefully before
enabling this function.
v. Connect
: Click this button to make the drive you have selected accessible for re-
mote console interaction. Once you have clicked "connect," users logged in remote
servers will have access to the local drive that you have selected.
vi. Disconnect
: Click this button to cancel the connection established between
a local drive and a remote server. Once you click this button, the drive you have
selected will not be accessible for remote console interface.
vii. Sending Commands
: This functions allows the user to issue a pre-defi ned
command to a remote server for execution.
To use this function, you need to click the hot keys displayed on the upper right
corner of the screen as shown below. (
Note
: Hot keys are the commands that have
been pre-defi ned and pre-stored in a remote consoles.)
Click Button 7 "Ctrl+Alt+Delete" as shown on Page 3-49 to send the command
"Ctrl+Alt+Delete" to the remote server for execution.
Once you have clicked on the button, a message displays, asking you if you really
want to send "Ctrl+Alt+Delete" as shown in the picture on the next page. Click
"Yes" to confi rm it or click "Cancel" to stop sending the command for remote execu-
tion.
Warning Message
