4-12
A1SAi & A1SRi Series Motherboard User’s Manual
Pass Gate Maximum Repetition
Use this feature to specify the maximum number that the Pass Gate tests will
be repeated. Use the keyboard to enter the desired value.
Pass Gate Minimum Repetition
Use this feature to specify the minimum number that the Pass Gate tests will be
repeated. Use the keyboard to enter the desired value.
Fast Boot
Select Enabled to skip the routine memory procedure and attempt to boot the
system using the last valid memory configuration settings at bootup. The options
are Disabled and
Enabled
.
Smm Size (MB)
Use the keyboard to enter a value for the size of the SMM/TSEG region where 1
MB is aligned to. The options are 2, 4,
8
, and 16.
Force Memory Map Ax
Select Enabled to force the BIOS setup utility to specify the total number of Kb (or
an error) of memory errors detected by the BIOS upon OS initialization. The options
are Auto and
Enabled
.
Memory Frequency
This feature sets the memory frequency limits for the DIMM modules installed on the
the motherboard. The options are
Auto,
DDR3-1333 (MHz), and DDR3-1600 (MHz).
Memory Channels
Use this feature to configure the settings for memory channels. The options are
Auto
and Single Channel.
MRC (Maximal Ratio Combining)
Debug Messages
Use this feature to set the debug output display in MRC. The options are Disabled,
Minimum,
Medium,
and Maximum.
DDR Voltage
Use this feature to set the DDR3 voltage setting. The default option is
Auto,
1.25V,
1.35V, and 1.50V.
Fine DDR Voltage
Use this feature to set the fine DDR3 voltage setting. Use the "+" or "-" keys to
set the value.
