Supero 2U Twin3 2015TA-HTRF, User Manual

Page: 24 / 94

2-10
SUPERSERVER 2015TA-HTRF User's Manual
2-6 Preparing to Power On
Next, you should check to make sure the hard drives and the backplane have been
properly installed and all connections have been made.
Checking the Hard Drives
The hard disk drives are accessable from the front of the server and can be 1.
installed and removed from the front of the chassis without removing the top
chassis cover.
Depending upon your system's con fi guration, your system may have one or 2.
more drives already installed. If you need to install hard drives, please refer to
Chapter 6.
Checking the Air fl ow
Air fl ow is provided by four 8-cm PWM fans and (for each serverboard) one 1.
air shroud. The system component layout was carefully designed to direct
suf
fi cient cooling air fl ow to the components that generate the most heat.
Note that all power and data cables have been routed in such a way that they 2.
do not block the air fl ow generated by the fans.
Providing Power
Plug the power cords from the power supplies unit into a high-quality power 1.
strip that offers protection from electrical noise and power surges.
It is recommended that you use an uninterruptible power supply (UPS). 2.
Finally, depress the power on button on the front of the chassis. 3.