INSTRUCTIONS
UNPACK AND UNFOLD SUPERNOVA LIGHT,
LAY ON A CLEAN FLAT SURFACE.
STEP #1. INFLATE INNER FIXTURE VALVE (fig. 3-4)
Inflate the internal bladder through Inner Fixture Inflation Valve located at bottom end of the light fixture.
Using the mid-size fill nozzle, inflate until the internal bladder is fully inflated, firm and straight.
STEP #2. INFLATE OUTER FIXTURE VALVE (fig. 5)
Inflate the outer inflatable through Outer Inflation Valve located at bottom end of the light fixture. Using
the mid-size fill nozzle, inflate until the inflatable is vvfully inflated, firm and straight.
WARNING: DO NOT OVER INFLATE.
e. If fixture requires more air, use Top Up Valve located at the Top of your SUPERNOVA (fig. 2).
Figure 6
USING YOUR SUPERNOVA LIGHT
1. CONNECTING THE POWER SUPPLY (fig. 6)
a. connect the power supply to the control box.
b. connect the control box to the SUPERNOVA
Light using Power Connection.
c. plug in wall outlet
2. THE REMOTE CONTROL
See guide below for functionality.
3. INSTALLATION (fig. 7):
- HANG IT: TWO WAYS TO HANG YOUR SUPERNOVA FIXTURE
a. Use the integrated Hang Tabs(fig. 1). Use an approved cord or chain connected to the hang tabs to
suspend the fixture. The power supply must be supported or suspended separately by an independent
cord. Always check that there is no tension on the power cord.
b. Use the SUPERNOVA BASE unit sold separately.
- LEAN IT:
Simply lean your supernova against the wall of your preference with the power supply on the
floor. Always assure their are no sharp materials, objects or nails on the wall before leaning.
- STAND IT:
See instructions included with SUPERNOVA BASE stand.
*THE SUPERNOVA LIGHT CAN BE LAID ON THE FLOOR, BUT IT’S NOT TO BE CONSIDERED A
SEATING ITEM.
SUPERNOVA
the
HUGGABLE
light
Hang Tab
Top-Up Valve
Power
Connection
Outer Fixture Valve
Inner Fixture
Deflation Valve
Hang Tab
Inner Fixture
Inflation Valve
Power Connection
Figure 3
Inner Fixture
Figure 4
Figure 1 - Bottom View
Figure 2 - Top View
Inner Fixture
Inflation Valve
Inner Fixture
Deflation Valve
Figure 5
Inflation Valve #2
No
Patterns
Remarks
No
Patterns
Remarks
1
Static red
8
2
Static blue
9
3
Static purple
10
4
Static green
11
5
Static yellow
12
6
Static cyan
13
7
Static white
Brightness is
adjustable,Speed is
unadjustable.
14
Speed and
brightness are
adjustable
R/B crossfade
B/G crossfade
G/R crossfade
Seven-color
jumpy changing
Three-color
jumpy changing
Three-color
gradual changing
gradual changing
Seven-color
Speed is
adjustable,brightness
is unadjustable
Speed is
adjustable,brightness
is unadjustable
Figure 7
LEAN
IT!
STAND
IT!
HANG
IT!
