IMPORTANT INFORMATION
• ALWAYS inflate LED Tube before SUPERNOVA fixture to prevent overheating.
• Do not let inflatable products come in contact with sharp, pointed objects.
• Fill with cold air only. NEVER USE HAIR DRIER TO INFLATE this could cause melting.
• Do Not Over Inflate. Bursting items can cause serious injury. Inflate the SUPERNOVA LIGHT until
most of the wrinkles in the material are gone and it feels firm to the touch.
• NEVER leave a light fixture on and unattended for long uninterrupted period of time.
WARNING:
• Not for use by children 3 and younger. Adult supervision required for inflation and deflation.
• Keep away from open flames, heaters, and other hot objects. Do not smoke near the inflatable light.
• This inflatable light is not for use in water. It is not a life saving device, not a personal flotation device,
or water toy.
• This inflatable light is not a toy. Do not stand, walk, jump or use sharp objects on the inflatable light.
This can result in serious injury or damage to the SUPERNOVA Light.
AIR MAINTENANCE:
Air temperature and weather do affect the air pressure in inflatable products. In cold weather your
SUPERNOVA LIGHT will lose some pressure due to the fact that the air will contract. If this occurs, you
may want to add a little air to improve your INFLATABLE LIGHT’s performance. However, in hot weather,
the air will expand. You must let some air out to prevent the INFLATABLE LIGHT from failing due to
overpressure. You should avoid exposing your INFLATABLE LIGHT to extreme temperatures (hot or cold).
DEFLATING
Open Inner Fixture Deflation Valve(fig. 4) and Outer Inflation Valve(fig. 5) and allow air to fully escape. For
rapid deflation attach valve to pump using the deflate extension, this will draw the air out quickly.
When fully deflated close valve.
WHEN TRANSPORTING:
1. Disconnect the power connector from the power supply.
2. Deflate the SUPERNOVA light following the DEFLATING directions above.
3. Fold the inflatable reversing the unfolding process. Use a clean flat surface.
4. Always place the inflatable in its package when deflated.
5. Do not roll the SUPERNOVA around the power supply
6. Do not place the SUPERNOVA near sharp objects
7. Handle with care
PATCH INSTRUCTIONS:
1. Clean the area around the hole or tear. You can use rubbing alcohol or soap and water to clean the
area; just ensure that no dirt or debris is present near the hole.
2. Cover the hole with a rag or your hand and inflate. You can not put a patch on a deflated object because
once you fill it with air, the material expands; the patch will not properly seal the hole if deflated.
3. Peel the back off of the patch, then place it over the hole and rub it a few times to flatten it out
smoothly over the surface of the inflatable. Ensure that you place the patch onto the hole, keeping the
hole centered within the patch. This way you'll create a tight seal, and no air will escape.
SUPERNOVA Prov. Patent #70352-00003
© 2010 Scale 1:1. All Rights Reserved. www.scale1to1.com
supernova light
power supply
remote/control box
pump
WHAT’S IN THE BOX:
SUPERNOVA
the
HUGGABLE
light
SUPERNOVA
the
HUGGABLE
light
ACCESSORIES:
sold separately
SUPERNOVA BASE
Allows your SUPERNOVA to be free standing, or
transforms into a mounting bracket when you hang it!
TAKE
IT!
UNFOLD
IT!
INFLATE
IT!
HUG
IT!
