C-4
X6DHR-3G2/X6DHR-EG2 User's Manual
Creating Arrays
Before creating arrays, make sure the disks for the array are connected and
installed in your system. Note that disks with no usable space, or disks that are un-
initialized are shown in gray and cannot be used. Refer to the section:
Initializing
Disk Drives
.
To create an array:
1
Turn on your computer and press
Ctrl+A
when prompted to access the Adaptec
RAID Confi guration Utility.
2
From the Adaptec RAID Confi guration Utility menu, select
Array Confi guration
Utility Main Menu.
3
From the Array Confi guration Utility menu, select
Create Array
.
4
Select the disks for the new array and press Insert (as the screen shown below).
(*Note:
To deselect any disk, highlight the disk and press
Delete
.)
5
After both disks for the new array are selected, press Enter. The Array Properties
menu displays (as the screen shown below).
Summary of Contents for X6DHR-3G2
Page 1: ... X6DHR 3G2 X6DHR EG2 USER S MANUAL Revision 1 0b SUPER ...
Page 20: ...1 14 X6DHR 3G2 X6DHR EG2 User s Manual Notes ...
Page 48: ...2 28 X6DHR 3G2 X6DHR EG2 User s Manual Notes ...
Page 80: ...A 6 X6DHR 3G2 X6DHR EG2 User s Manual Notes ...
