Chapter 4: AMIBIOS
4-11
Configure S-ATA as RAID
Select "Yes" if you wish to configure S-ATA as RAID. The options are
"Yes" and "
No
".
!
!
!
!
!
Primary, Secondary, Third and Fourth IDE Master and Slave
Settings
From the Main Setup screen, press <Enter> to access the sub menu for the
primary and secondary IDE master and slave drives. Use this screen to
select options for the Primary and Secondary IDE drives. Use the up and
down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to
change the value of the selected option. The settings are described on the
following pages.
S-ATA Keep Enabled
Select "Yes" to enable the function of S-ATA at all time. The options are
"
Yes
" and "No."
P-ATA Keep Enabled
Select "Yes" to enable the function of P-ATA at all time. The options are
"
Yes
" and "No."
P-ATA Channel Selection
This feature allows the users to select P-ATA channels. The options are
"
Both
", "Primary" and "Secondary."
S-ATA Ports Definition
This feature allows the users to define the location of S-ATA Ports. The
options are "
P0-3rd/P1-4th
" and "P0-4th/PI-3rd."
