Chapter 2: Installation
2-15
VGA Enable/Disable
JP4 allows you to enable or disable
the VGA port. The default position
is on pins 1 and 2 to enable VGA.
S e e t h e t a b l e o n t h e r i g h t f o r
jumper settings.
Jumper
Position
1-2
2-3
Definition
Enabled
Disabled
VGA Enable/Disable
Jumper Settings
(JP4)
GLAN/LAN Enable/Disable
Change the setting of JP3 to
enable or disable the onboard
GLAN. Change the setting of
JP6 to enable or disable the
onboard LAN for the X5DPA-
TGM/TGM+. See the table on
the right for jumper settings.
The default setting is enabled
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
LAN
Enable/Disable
Jumper Settings
(JP3: LAN 1, JP6: LAN2 )
Front Side Bus Speed
JP39 (see motherboard layout ) is
used to set the system (front side)
bus speed for the processors. It
is best to keep this jumper set to
Auto. This jumper is used to-
gether with the CPU Clock setting
in BIOS. See the table on the right
for jumper settings.
Jumper
Position
Pins 1-2
Pins 2-3
Open
Definition
Auto
400 MHz
533 MHz
Front Side Bus Speed
Jumper Settings (JP39)
Watch Dog Enable/Disable
JP41 allows you to enable or dis-
able the functions of Watch Dog.
S e e t h e t a b l e o n t h e r i g h t f o r
jumper settings. Close Pins 1-2 for
reset(*default). Close Pins 2-3 to
activate the function of NMI (Non
Maskable Interrupt).
Jumper
Position
1-2
2-3
Definition
Reset
NMI
Watch Dog Enable/
Disable Jumper Settings
(JP37)
