2-10
SUPER X5DPA-TGM/X5DPA-TGM+ User's Manual
Power Button
The Power Button connection is
located on pins 1 and 2 of JF2.
Momentarily contacting both pins
will power on/off the system. This
button can also be configured to
function as a suspend button (see
the Power Button Mode setting in
B I O S ) . T o t u r n o f f t h e p o w e r
when set to suspend mode, de-
press the button for at least 4
seconds. Refer to the table on the
right for pin definitions.
P in
Number
1
2
Definition
PW _O N
G round
P ow er Butto n
Connector
P in Definitions
(JF2)
Back Panel Universal
Serial Bus (USB0/1)
Two Universal Serial Bus ports
(J10, J11) are located beside the
PS/2 keyboard/mouse ports. USB0
is the bottom connector and USB1
is the top connector. See the table
on the right for pin definitions.
Back Panal Universal Serial Bus Pin
Definitions (J10, J11)
Pin
Number
Definition
1
+5V
2
P0-
3
P0+
4
Ground
Pin
Number
Definition
1
+5V
2
P0-
3
P0+
4
Ground
USB0
USB1
Reset Button
The Reset Button connection is lo-
cated on pins 3 and 4 of JF2. At-
t a c h i t t o t h e h a r d w a r e r e s e t
s w i t c h o n t h e c o m p u t e r c a s e .
Refer to the table on the right for
pin definitions.
Chassis Intrusion
A Chassis Intrusion header is lo-
cated at JL1. Attach the appropri-
ate cable to inform you of a chas-
sis intrusion.
Pin
Number
3
4
Definition
Reset
Ground
Reset Pin
Definitions
(JF 2)
TGM+
