Super X11SPG-TF User's Manual
92
Super IO Configuration
The following Super IO information will display:
•
Super IO Chip AST2500
Serial Port 1 Configuration
This submenu allows the user to configure the settings of Serial Port 1.
Serial Port 1
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled
.
Device Settings
This item displays the status of a serial part specified by the user.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select
Auto to allow the BIOS to automatically assign the
base I/O and IRQ address.
The options for Serial Port 1 are Auto,
(IO=2F8h; IRQ=3;)
, (IO=3F8h; IRQ=3;), (IO=3E8h;
IRQ=3;), and (IO=2E8h; IRQ=3;).
Serial Port 1 Attribute
Select SOL to use COM Port 1 as a Serial Over LAN (SOL) port for console redirection.
The options are
SOL
and
COM.
Serial Port Console Redirection
SOL/COM1 Console Redirection
Select Enabled to enable console redirection support for a serial port specified by the user.
The options are
Enabled
and Disabled.
*If the item above is set to Enabled, the following items will become available for
configuration:
SOL/COM1 Console Redirection Settings
Use this feature to specify how the host computer will exchange data with the client
computer, which is the remote computer used by the user.
