51
Chapter 2: Installation
BAR CODE
BIOS
LICENSE
IPMI CODE
BP
PWR2
BP
PWR1
P1-DIMMC1
I-SATA4~7
P1-DIMMB2
I-SATA0~3
P1-DIMMB1 P1-DIMMC2
P1-DIMMA1
P1-DIMMA2
CPU1_POR
T2C
SXB3B
JWD1
JVRM1
JVRM2
CPU1_POR
T3C
CPU1_POR
T3A
CPU1_POR
T2A
SXB3C
CPU1_POR
T1A
SXB3A
P1-DIMMD2
P1-DIMMD1P1-DIMME2
P1-DIMME1
P1-DIMMF1 P1-DIMMF2
USB0/1(3.0)
CPU2
CPU1
BATTERY
COM1
IPMI_LAN
UID
USB3/4(3.0)
P2-DIMMC2 P2-DIMMC1
P2-DIMMB1
P2-DIMMB2
P2-DIMMA1
P2-DIMMA2
CPU2_DMI
PCH_POR
T1
CPU2_POR
T1A
SXB2
VGA
SXB1C
CPU2_POR
T2A
CPU2_POR
T2C
SXB1A
P2-DIMMD2
P2-DIMMD1
P2-DIMME2
P2-DIMME1
P2-DIMMF1 P2-DIMMF2
USB2(3.0)
GPU PWR2
X11DPU-Z+
REV:1.01
JS1
JHFI2
JSD1
JSD2
S-SA
TA4
S-SA
TA5
NVME13
NVME12
JHFI1
JNVI2C1
NVME11
NVME10
JPW2
T-SGPIO3
FAN4
JRK1
JSDCARD1
JBT1
BT1
LEDM1
SXB1_3
LE2
JNVI2C2
GPU PWR1
JGPW4
JGPW2
JUSB3
FAN8
LED1
JUSBA1
SP1
JIPMB1
FAN1
FAN2
FAN3
FAN5
FAN6
FAN7
JPG1
JPME1
JF1
SXB1_2
SXB3_2
PSU1
JPW3
JPW1
JPW4
SXB3_3
SXB1_1
SXB3_1
JL1
JUIDB2
JTPM1
JS2
CPU2_POR
T3A
SXB1B
CPU2_POR
T3C
BMC
BIOS
PCH
PSU2
JHFI1 Header
(for CPU1)
B
A
JHFI1
JHFI2 Header
(for CPU2)
3
4
6
5
1
F Model
Processor
HFI (Host Fabric
Interface) Sideband
Cable
HFI Carrier
Card
3. Connect the HFI connector
on the HFI cable to the
onboard JHFI1 header.
IFP Cable (Optional)
Install an F model CPU
on Socket#1 (and another
F model CPU on Socket#2 if needed.
Then repeat Step 1 to Step 6
for HFI support for CPU2.)
2
2. Install an HFI card to a PCI-E slot
4. Connect another end of
the HFI cable to the
connector (A)
of the HFI card.
5. Connect one end of
the IFP cable to the
connector (B)
of the HFI card.
6. Connect the other end of
the IFP cable to the
F model CPU.
Host Fabric Interface (HFI) Carrier Card Sideband Headers (for
the F Model CPU Only)
Two Host Fabric Interface (HFI) carrier card headers are located at JHFI1/JHFI2 on the
motherboard. These JHFI1/JHFI2 headers are used when F model processors are installed on
the motherboard. Please note that JHFI1 is used for the F model processor installed in CPU
Socket#1, and JHFI2, used for the processors in CPU Socket#2. When only one processor is
used, please install it on CPU Socket#1 first. Then, use an HFI sideband cable to connect the
carrier card to the JHFI header, and use an appropriate IFP (Internal-Faceplate-to-Processor)
cable (optional) to connect the carrier card to the F model processor in CPU Socket #1 for
system performance enhancement. Please follow the same steps above to enable Host
Fabric Interface support for CPU2. See the table on the next page for JHFI1/JHFI2 pin-out
definitions, and also refer to Page 34 for the installation instructions.
Notes:
For the HFI carrier card to function properly, please purchase the appropriate
IFP cable(s) from Supermicro. Please refer to Supermicro's website at www.supermicro.
com for the part number of the IFP cable specified for your system.
Notes: 1. IFP Cable (*See Note above) 2. Please repeat Step 1 to Step 6 to enable HFI support for CPU2.
CPU Socket #1
CPU Socket #2
