13
Chapter 1: Introduction
Quick Reference Table
Jumper
Description
Default Setting
JBT1
Clear CMOS
See Chapter 2
JPME2
ME ManufactureMode
Pins 1-2 (Normal)
3JWD1
Watch Dog Timer Enable
Pins 1-2 (Reset)
Connectors
Description
Battery (BT1)
Onboard CMOS Battery (See Chpt. 3 for used battery disposal)
FAN8/FAN9
CPU/System Cooling Fan Headers
FAN_CTRL
Fan 1-7 control header
FAN_PWR1
Power connector for front fans
JF1
Front control panel header
JL1
Chassis intrusion header (Note: please connect a cable from the Chassis Intrusion header at
JL1 to the chassis to receive an alert via IPMI.)
JP2
CPLD programming header
HDD_PWR1/2
Power connectors for HDD devices
JPW1~4
8-pin power connectors for GPU devices
JPSU1~2
Power supply input
JSCARD1
Micro SSD (Solid State Drive) card slot (reserved for manufacture use)
JSTBY1
Standby power header
JTPM1
TPM (Trusted Platform Module)/Port 80 Header
JTEMP1
Front control panel temperature header
JUSB3
USB 3.0 header
(I-)SATA0~3
Intel® SATA 3.0 Connectors from Intel® PCH SATA controller
I-SGPIO1
Serial Link General Purpose I/O Header
VROC (JRK1)
Intel VROC RAID key header for NVMe SSD
LED
Description
State
Status
LEDM1
BMC Heartbeat LED
Green
BMC Normal
LE2
Onboard Power LED
Green
Power On
LE6
Power Status LED
Green/Red
Power On/Standby
