2-14
X10SLH-LN6TF User’s Manual
Removing Memory Modules
Reverse the steps above to remove the DIMM modules from the motherboard.
Memory Support
The X10SLH-LN6TF supports up to 32GB of Unbuffered (UDIMM) DDR3 ECC
1600/1333 MHz (1.35V/1.5V) memory in four slots. Populating these DIMM mod
-
ules with a pair of memory modules of the same type and same size will result
in interleaved memory, which will improve memory performance. Please refer to
the table below:
Memory Population Guidelines
Please follow the table below when populating the X10SLH-LN6TF.
DDR3 Unbuffered ECC (UDIMM) Memory
DIMM Slots per
Channel
DIMMs Populat-
ed per Channel
DIMM Type
POR Speeds
Ranks per DIMM (any
combination)
2
1
Unbuffered
DDR3
1333, 1600
Single Rank, Dual Rank
2
2
Unbuffered
DDR3
1333, 1600
Single Rank, Dual Rank
Notes:
•
Be sure to use memory modules of the same type, same speed, same
frequency on the same motherboard. Mixing of memory modules of dif-
ferent types and speeds is not allowed.
•
Due to memory allocation to system devices, the amount of memory that
remains available for operational use will be reduced when 4 GB of RAM
is used. The reduction in memory availability is disproportional. See the
following table for details.
Slot B2
(Blue Slot)
Slot B1
Slot A1
Slot A2
(Blue Slot)
Towards the edge of the motherboard
Towards the CPU
