Chapter 4: AMI BIOS
4-13
Memory Frequency
Use this feature to set the maximum memory frequency for onboard memory
modules. The options are
Auto
,
1333, 1400, 1600, 1800, 1867, 2000, 2133,
2200, 2400, 2600, 2667, and Reserved (Do not select Reserved).
ECC Support
Select Enable to enable Error Checking & Correction (ECC) support for onboard
memory modules. The options are
Auto
, Enable and Disable.
Data Scrambling
Select Enabled to enable data scrambling to enhance system performance and
data integrity. The options are
Auto
, Disabled and Enabled.
Enable ADR
Select Enabled for ADR (Automatic Diagnostic Repository) support to enhance
memory performance. The options are Enabled and
Disabled
.
DRAM RAPL (Running Average Power Limit) Baseline
Use this feature to set the run-time power-limit baseline for the DRAM modules.
The options are Disable, DRAM RAPL Mode 0, and
DRAM RAPL Mode 1
.
Set Throttling Mode
Throttling improves reliability and reduces power consumption in processors via
automatic voltage control during processor idle states. The options are Disabled
and
CLTT
(Closed Loop Thermal Throttling).
Channel Interleaving
Use this item to set the channel interleaving mood for the DIMM modules. The
options are
Auto
, 1-Way Interleave, 2-Way Interleave, 3-Way Interleave, and
4-Way Interleave.
Rank Interleaving
Use this item to select the memory interleaving mode for memory ranks. The
options are
Auto
, 1-Way, 2-Way, 4-Way, and 8-Way.
A7 Mode
Select Enabled to support the A7 (Addressing) mode to improve memory per-
formance. The options are
Enable
and Disable.