1-8
X10DRFF/X10DRFF-C Motherboard User’s Manual
•
RAID
RAID 0, 1, 10 (from the LSI con-
troller)
IPMI 2.0
•
IPMI 2.0 supported by the Aspeed (AST) 2400 BMC
Serial (COM) Port Header
•
One (1) Fast UART 16550 Connection: 9-pin RS-232
port header
VGA
•
Rear VGA Port
Peripheral
Devices
USB Devices
•
Two (2) Rear USB 3.0 ports on the I/O backplane,
inlcuding: JUSB1 (used as Rear USB3.0 Port 1),
JUSB2 (USB 3.0 Port 2),
•
One USB port for front access: JUSB3 (USB 3.0
Connector 6)
BIOS
•
16 MB AMI SPI BIOS Flash ROM
•
DMI/DMI2 2.3, PCI 2.3, ACPI 2.0/3.0/4.0, USB Key-
board, Plug & Play (PnP), UEFI 2.3.1, and SMBIOS
2.7 or later,
Power
•
ACPI Power Management
Config.
•
Main switch override mechanism
•
Keyboard Wake-up from Soft-Off
•
Power-on mode for AC power recovery
•
Intel
®
Intelligent Power Node Manager (available
when the Supermicro Power Manager [SPM] is
installed)
•
Management Engine
•
Riser Card auto-detection
System
Health
System Health Monitoring
Monitoring
•
Onboard system health monitors for +3.3V,
3.3VStandby, +5V, +5V Standby, +12, -12, chipset
voltage, memory voltage, and battery voltage.
•
CPU 6-Phase switching voltage regulator
•
CPU/System overheat LED and control
•
CPU Thermal Trip support
•
Thermal Monitor 2 (TM2) support