Chapter 3: Maintenance and Component Installation
29
DIMM Installation
1. Insert DIMM modules in the following
order: DIMMA2, DIMMB2, then DIMMA1,
DIMMB1. For the system to work properly,
use memory modules of the same type
and speed.
2. Align the DIMM module key with the
receptive point on the single-latch DIMM
slot.
3. Push the release tab outwards to unlock
the slot.
4. Press both ends of the module straight
down into the slot until the module snaps
into place.
5. Push the release tab to the lock position to
secure the module into the slot.
DIMM Removal
Reverse the steps above to remove the DIMM
modules from the motherboard.
Receptive Point
Release Tab
Notch
Push both ends straight
down into the memory slot.
DIMMA1
DIMMA2
DIMMB1
DIMMB2
USB11 (USB3.2 (20Gb))
USB4/5 (USB3.2 (5Gb)) USB6 (USB3.2 (5Gb))
BMC_HB_LED
DP
HDMI
DVI
USB0/1
LAN1
USB7 (3.2 (10Gb))
USB10 (3.2 (20Gb))
LAN2
USB8/9 (3.2 (10Gb))
JPL2
JPAC1
PCI-E M.2-M2
PCI-E M.2-M3
PCI-E M.2-M1
JPW1
CPU SLOT7 PCI-E 5.0 X16
CPU SLOT4 PCI-E 5.0 X8 (IN x16)
PCH SLOT5 PCI-E 3.0 X4
PCH SLOT2 PCI-E 3.0 X4
SLOT1 PCI 33MHz
BT1
MAC CODE
BMC CODE
BAR CODE
MAC CODE
BIOS LICENSE
X13SAE
DESIGNED IN USA
REV:1.00
JPME2
JLED1
JD1
I-SATA0
I-SATA1
I-SATA2
I-SATA3
I-SATA4
I-SATA5
I-SATA6
I-SATA7
JWD1
PWR_LED
CATERR_LED
JSTBY1
JL1
JSD1
SYS_F
AN3
SYS_FAN2
SYS_FAN1
CPU_FAN2
CPU_FAN1
JPW2
12V_PUMP_PWR1
AUDIO_FP
COM1
USB2/3
JTPM1
SP1
JF1
JBT1
JPI2C1
PCH
AUDIO
JPL1