28
Chapter 3: Maintenance and Component Installation
DIMMA1
DIMMA2
DIMMB1
DIMMB2
USB11 (USB3.2 (20Gb))
USB4/5 (USB3.2 (5Gb)) USB6 (USB3.2 (5Gb))
BMC_HB_LED
DP
HDMI
DVI
USB0/1
LAN1
USB7 (3.2 (10Gb))
USB10 (3.2 (20Gb))
LAN2
USB8/9 (3.2 (10Gb))
JPL2
JPAC1
PCI-E M.2-M2
PCI-E M.2-M3
PCI-E M.2-M1
JPW1
CPU SLOT7 PCI-E 5.0 X16
CPU SLOT4 PCI-E 5.0 X8 (IN x16)
PCH SLOT5 PCI-E 3.0 X4
PCH SLOT2 PCI-E 3.0 X4
SLOT1 PCI 33MHz
BT1
MAC CODE
BMC CODE
BAR CODE
MAC CODE
BIOS LICENSE
X13SAE
DESIGNED IN USA
REV:1.00
JPME2
JLED1
JD1
I-SATA0
I-SATA1
I-SATA2
I-SATA3
I-SATA4
I-SATA5
I-SATA6
I-SATA7
JWD1
PWR_LED
CATERR_LED
JSTBY1
JL1
JSD1
SYS_F
AN3
SYS_FAN2
SYS_FAN1
CPU_FAN2
CPU_FAN1
JPW2
12V_PUMP_PWR1
AUDIO_FP
COM1
USB2/3
JTPM1
SP1
JF1
JBT1
JPI2C1
PCH
AUDIO
JPL1
3.4 Memory
The X13SAE supports up to 128GB of DDR5 Unbuffered DIMM (UDIMM) ECC/non-ECC with
speeds of up to 4400MHz.
Note:
Check the Supermicro website for recommended memory modules.
Important:
Exercise extreme care when installing or removing DIMM modules to pre vent
any possible damage.
General Guidelines for Optimizing Memory Performance
•
When installing memory modules, the DIMM slots should be populated in the following
order: DIMMA2, DIMMB2, then DIMMA1, DIMMB1.
•
For optimal performance, use DDR5 memory of the same type, size, and speed.
•
Mixed DIMM speeds can be installed. However, all DIMMs will run at the speed of the
slowest DIMM.
•
The motherboard supports odd-numbered modules (one or three modules installed).
However, to achieve the best memory performance, a balanced memory population is
recommended.
DIMMA1
DIMMA2
DIMMB1
DIMMB2