Chapter 2: Installation
33
2.7 Workstation Setup
The system can be configured in a workstation or a server rack orientation. It is shipped as
a workstation with the chassis cover and feet pre-installed. Use the instructions below to
convert a rackmounted system to tower mode.
Returning a Rackmounted System to a Workstation Setup
1. Shut down the system and remove power as described in Section 3.1.
2. Remove the chassis from the rack as described in Section 2.5.
3. Remove the inner rails and the handles.
4. Align the cover post with the corresponding holes on the top of the chassis and place
the cover on top of the chassis.
5. Slide the cover toward the rear of the chassis to lock the cover into place.
Figure 2-9. Installing the Top Tower Cover and Feet
Top Cover
Chassis Feet
