Supermicro SuperStorageSystem SSG-2028R-DN2R40L, User Manual

Page: 8 / 84

Chapter 1: Introduction SUPERSTORAGESYSTEM SSG-2028R-DN2R40L User's Manual
1-4 1-5
Front Control Panel
Two control panels are included on each end of the SSG-2028R-DN2R40L
SuperStorageSystem to provide you with system monitoring and control. LEDs
indicate system power, network (NIC) activity, system overheat and power supply
failure. Each set of LEDs are associated with the node/serverboard on the same
side of the chassis. A single power button is located on the left side control panel.
When pressed, both nodes will power on or off according to the BIOS setup settings.
Cooling System
The SC227STS-R2K05P chassis has five (5) 8-cm behind the HDD backplane and
two (2) 4-cm counter-rotating fans at the rear of each node. This counter-rotating
action works to dampen vibration levels while generating exceptional airflow.
Each power supply module also includes a cooling fan.
Mounting Rails
The SC227 includes a set of rails, and can be placed in a rack for secure storage
and use. To setup your rack, follow the step-by-step instructions included in this
manual in Chapter 2.
1-4 ACPI Features
Intel® Intelligent Power Node Manager (NM)
The Intel® Intelligent Power Node Manager (IPNM) provides your system with
real-time thermal control and power management for maximum energy efficiency.
Although IPNM Specification Version 1.5 is supported by the BMC (Baseboard
Management Controller), your system must also have IPNM-Compatible
Manageability Engine (ME) firmware installed to use this feature.
Manageability Engine (ME)
The Manageability Engine, which is an ARC controller embedded in the IOH (I/O
Hub), provides Server Platform Services (SPS) to your system. The services
provided by SPS are different from those provided by the ME on client platforms.
Figure 1-1. C612 Chipset Block Diagram
SPI
RGMII
Debug Card
SYSTEM POWER
CTRL
FAN SPEED
PCI-E X1
G2
USB 2.0 #6/7 USB2.0
PCH
6.0 Gb/S
USB 3.0
LPC
US
B
#1
#0
SAT
A
BIOS
SPI
SPI
Temp Sensor
EMC1402-1 *2 at diff SMBUS
TPM HEADER
USB 3.0
US
B
BIOS
HEADER
SPI
AST2400
BMC
#5
CO
M
1
Hea
de
r
VGA Header
BMC Boot
Flash
DDR3
1333/213
3
P1
P1
P0
P0
#2-1
DDR4
QPI
9.6G
CPU0
PCI-E X16 G3
DMI2
PCI-E X16 G3
PCI-E X4 G3
DMI2
CPU1
SNB CORE
DDR4
SNB CORE
DDR4
QPI
9.6G
4GB/s
PCI-E X4 G3
PCI-E X16 G3
PCI-E X16 G3
PCI-E X8 G3
#2-2
#2-3
#2-4
#2-5
#2-6
#2-7
#2-8
PVCCIO
(1.05/0.95)
from 3.3v
REAR IO
SIOM
LUIO
LAN
X540
XL710
HB
#0
#1
Type-A
Mux
RMII/NCSI
LAN3
RTL8211E
-VB-CG
Rear RJ45
LAN4
RTL8211E
-VB-CG
IPMI
LAN
SWITCH GPIOH6
Rear RJ45
SHARED
LAN
MAC1 MAC2
BMC
HB
X86 HB
COM1 COM2
LUIO
LPC
Midplane
#3 #2 #1A#1B
DMI2 #3 #2 #1
1333/213
3
#1-1
DDR4
#1-2
#1-3
#1-4
#1-5
#1-6
#1-7
#1-8
Notes:
Note 1: This is a general block diagram and may not exactly represent the
features on your motherboard. See the Motherboard Features pages for the
actual specifications of each motherboard.
Note 2: Both CPUs need to be installed for full access to the PCI-E slots, DIMM
slots, and onboard controllers. Refer to the block diagram above to determine
which slots or devices may be affected.