Supermicro SuperStorageSystem 6038R-E1CR16L, User Manual

Page: 72 / 81

Chapter 7: BIOS
7-41 7-40
S
UPER
S
TORAGE
S
YSTEM 6038R-E1CR16L User's Manual

Change SMBIOS Event Log Settings
This feature allows the user to configure SMBIOS Event settings.
Enabling/Disabling Options
SMBIOS Event Log
Select Enabled to enable SMBIOS (System Management BIOS) Event Logging
during system boot. The options are
Enabled and Disabled.
Runtime Error Logging Support
Select Enable to support Runtime Error logging. The options are Enabled and
Disabled. If this item is set to Enabled, the following item will be available for
configuration:
Erasing Settings
Erase Event Log
Select Yes to erase all error events in the SMBIOS (System Management BIOS)
log before an event logging is initialized at bootup. The options are
No , Yes, Next
reset, and Yes, every reset.
When Log is Full
Select Erase Immediately to immediately erase all errors in the SMBIOS event log
when the event log is full. Select Do Nothing for the system to do nothing when
the SMBIOS event log is full. The options are
Do Nothing and Erase Immediately.
SMBIOS Event Log Standard Settings
Log System Boot Event
Select Enabled to log system boot events. The options are Disabled and Enabled.
MECI (Multiple Event Count Increment)
Enter the increment value for the multiple event counter. Enter a number between
1 to 255. The default setting is
1 .
METW (Multiple Event Count Time Window)
This item is used to determine how long (in minutes) the multiple event counter
should wait before generating a new event log. Enter a number between 0 to 99.
The default setting is
60 .
Note : Please reboot the system for the changes to take effect.

View SMBIOS Event Log
This item allows the user to view the event in the SMBIOS event log. The following
categories are displayed:
Date/Time/Error Code/Severity
BMC (Baseboard Management Controller) Firmware Revision
This item indicates the BMC firmware revision used in your system.
Status of BMC
This item indicates the status of the onboard BMC chip installed in your system.
7-4 Event Logs
This submenu allows the user to configure Event Log settings.