Supermicro SuperStorageServer SSG-6119P-ACR12N4L User Manual Download Page 111

Page: 111 / 211

Chapter 6: UEFI BIOS

111

TXT Support

Select Enabled to enable Intel Trusted Execution Technology (TXT) support to enhance
system security and data integrity. The options are

Disabled

and Enabled.

Note 1:

If the option for this feature (TXT Support) is set to Enabled, be sure to disable

EV DFX (Device Function On-Hide) support for the system to work properly. (EV DFX

is under "IIO Configuration" in the "Chipset/North Bridge" submenu.)

Note 2:

For more information on TPM, please refer to the TPM manual at

http://www.

supermicro.com/manuals/other/TPM.pdf.



HTTP BOOT

Configuration

Use this feature to configure HTTP Boot settings for your system.

HTTP Boot One Time

If this feature is set to Enabled, the system will automatically boot into the HttpBoot setting

that has been previously configured when it is powered up the first time. The options are

Disabled

and Enabled.

Input the description

This feature allows the user to input the description of the boot.

Boot URI

This feature allows the user to boot the system from a network connection.



TLS Authenticate Configuration

When this submenu is selected, the following features will be displayed:



Server CA Configuration

This feature allows the user to configure the client certificate that is to be used by the server.



Enroll Certification

This feature allows the user to enroll the certificate in the system.



Enroll Cert (Certification) Using File

This feature allows the user to enroll the security certificate in the system by using a file.

Cert (Certification) GUID (Global Unique Identifier)

This feature displays the GUID for this system.

Summary of Contents for SuperStorageServer SSG-6119P-ACR12N4L




















































































































































































































Search results

Summary of Contents for SuperStorageServer SSG-6119P-ACR12N4L

Reviews:

Supermicro SuperStorageServer SSG-6119P-ACR12N4L, User Manual, Page: 111 / 211

Search results

Summary of Contents for SuperStorageServer SSG-6119P-ACR12N4L

Reviews: