36
SuperServer E403-9D-4C/8CN/12C/14C/14CN/16C-FN13TP User's Manual
Figure 2-14. Installing or Replacing the Fan Filters
Installing or Replacing the Fan Filters
The system supports three fan filters that can be removed and cleaned. Power to the system
can remain on while the the fan filters are removed or installed.
1. Access the fans as described in Section 2.2.
2.
Grab the fan filter's top edge and pull up from the chassis.
3.
Clean the filter if necessary.
4.
With the filter's flat edge facing inward, insert the filter back into its slot.
5.
Remove, clean, and reinsert the other filters if necessary.
6. Close the chassis fan cover and replace the two screws.
Note:
Regular cleaning of the fan filters maintains proper airflow and prevents overheating.
flat edge
edge with lip
4
