Supermicro SuperServer 8048B-TRFT, User Manual

Page: 80 / 84

A-1
Appendix A: BIOS Error Beep Codes
Appendix A
BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed at each
system boot, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue to
boot. The error messages normally appear on the screen.
Fatal errors
will not allow the system to continue with bootup procedure. If a
fatal error occurs, you should consult with your system manufacturer for possible
repairs.
These fatal errors are usually communicated through a series of audible beeps.
The numbers on the fatal error list correspond to the number of beeps for the
corresponding error.
X10 Motherboard BIOS Error Beep Codes
Beep Code/LED Error Message Description
1 beep Refresh Ready to boot
5 short beeps + 1 long
beep
Memory error No memory detected in the
system
5 beeps No Con-In or No
Con-Out devices
Con-In includes USB or PS/2
keyboard, PCI or Serial Con-
sole Redirection, IPMI KVM
or SOL.
Con-Out includes Video Con-
troller, PCI or Serial Console
Redirection, IPMI SOL.
X10 IPMI Error Codes
1 Continuous Beep System OH System Overheat