Chapter 7: BIOS
7-39
7-38
SUPERSERVER 8048B-TRFT USER'S MANUAL
Change Settings
This option specifies the base I/O port address and the Interrupt Request address
of Serial Port 1 (COM). Select
Disabled to prevent the serial port from accessing
any system resources. When this option is set to Disabled, the serial port becomes
unavailable. The options are
Auto
, IO=3F8h; IRQ=4; IO=3F8h; IRQ=3, 4, 5, 6, 7,
10, 11, 12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 10,
11, 12; IO=2E8h; IRQ=IRQ=3, 4, 5, 6, 7, 10, 11, 12.
Device Mode
Use this feature to select the desired mode for a serial port specified. The options
are
24MHz/13
and 24MHz.
Serial Port 1 Configuration
Serial Port
Select Enabled to enable a serial port specified by the user. The options are
En-
abled
and Disabled.
Device Settings
This item displays the settings of Serial Port 1.
Change Settings
This option specifies the base I/O port address and the Interrupt Request address
of Serial Port 2 (SOL). Select
Disabled to prevent the serial port from accessing
any system resources. When this option is set to Disabled, the serial port becomes
unavailable. The options are
Auto
, O=2F8h; IRQ=3; IO=3F8h; IRQ=3, 4, 5, 6, 7,
10, 11, 12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 10,
11, 12; IO=2E8h; IRQ=IRQ=3, 4, 5, 6, 7, 10, 11, 12.
Device Mode
Use this feature to select the desired mode for a serial port specified. The options
are
24MHz/13
and 24MHz.
Serial Port 2 Attribute
Use this feature to select the attribute for this serial port. The options are
COM/
SOL
(Serial On LAN), and COM.
COM1 Console Redirection
COM 1 Console Redirection
This submenu allows the user to configure the following Console Redirection set
-
tings for this port.
Console Redirection
Select Enabled for Console Redirection support. The options are
Enabled
and
Disabled
.
COM2/SOL Console Redirection
This submenu allows the user to configure the following Console Redirection set
-
tings for the SOL Port specified by the user.
Console Redirection
Select Enabled to use the SOL Port for Console Redirection. The options are
Enabled
and Disabled.
Console Redirection Settings
This feature allows the user to specify how the host computer will exchange data
with the client computer, which is the remote computer used by the user.
Terminal Type
This feature allows the user to select the target terminal emulation type for Con-
sole Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to
add color and function key support. Select ANSI to use the Extended ASCII Char-
acter Set. Select VT-UTF8 to use UTF8 encoding to map Unicode characters
into one or more bytes. The options are
ANSI, VT100,
VT100+
, and VT-UTF8.
Bits Per second
Use this feature to set the transmission speed for a serial port used in Console
Redirection. Make sure that the same speed is used in the host computer and the
client computer. A lower transmission speed may be required for long and busy
lines. The options are 9600, 19200, 38400, 57600 and
115200
(bits per second).
Data Bits
Use this feature to set the data transmission size for Console Redirection. The
options are 7 Bits and
8 Bits
.
Parity
A parity bit can be sent along with regular data bits to detect data transmission
errors. Select Even if the parity bit is set to 0, and the number of 1's in data bits
Summary of Contents for SuperServer 8048B-TRFT
