Supermicro SuperServer 6048R-TXR, User Manual

Page: 57 / 132

Chapter 5: Advanced Serverboard Setup
5-11
5-6 Adding PCI Add-On Cards
The SuperServer 6048R-TXR server can support 10 PCI-Express 3.0 x8 and one
PCI-Express 2.0 x4 (in x8 slot) expansion cards.
Installing an Add-on Card
1. Locate the release tab on the top of the PCI slot bracket.
2. Gently apply pressure in the middle of the release tab to unlock the PCI slot
bracket.
3. Pull the release tab upward.
4. Remove the screw holding the bracket in place and pull the bracket from the
chassis.
5. Install your PCI card or other add-on card into the PCI slot bracket and
serverboard. To do this, slide the PCI card (with "L" bracket) into the PCI slot
and secure the card to the serverboard.
6. Push the PCI bracket release tab down until it locks into place with an audible
"click".
7. Secure the PCI card with the screw previously removed from the chassis.
8. Repeat this process with each PCI card you want to install into the chassis.
INTEL CONFIDENTIAL
Intel and the Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Other names and brands
may be claimed as the property of others. All products, dates, and figures are preliminary and are subject to change without any notice. Copyright © 2012, Intel Corporation.
Type
Ranks Per
DIMM and
Data
Width
DIMM
Capacity (GB)
Speed (MT/s); Voltage (V);
Slot Per Channel (SPC) and DIMM Per Channel (DPC)
1 Slot Per
Channel
2 Slots Per Channel 3 Slots Per Channel
1DPC 1DPC 2DPC 1DPC 2DPC 3DPC
4Gb 8Gb
1.2V 1.2V 1.2V 1.2V 1.2V 1.2V
RDIMM SRx4 8GB 16GB 2133 2133 1866 2133 1866 1600
RDIMM SRx8 4GB 8GB
2133 2133 1866 2133 1866 1600
RDIMM DRx8 8GB 16GB 2133 2133 1866 2133 1866 1600
RDIMM DRx4 16GB 32GB 2133 2133 1866
2133
1866 1600
LRDIMM QRx4 32GB 64GB
2133 2133 2133 2133 2133 1600
DDR4 Memory POR for Haswell-EP
1