Supermicro SUPERSERVER 6028R-TDWNR, User Manual

Page: 41 / 75

Chapter 5: Advanced Serverboard Setup
5-25 5-24
S
UPER
S
ERVER 6028R-TDWNR User's Manual
5-11 Onboard Indicators
LAN Port LEDs
The Ethernet ports (located beside
the VGA port) have two LEDs. One
LED indicates activity when blinking
while the other LED may be green,
amber or off to indicate the speed of
the connection. See the table on the
right for the functions associated with
the connection speed LED.
LAN LED
Connection Speed Indicator
LED Color Definition
Off No connection or 10 Mb/s
Green 100 Gb/s
Amber 1 Gb/s
Dedicated IPMI LAN LEDs
In addition to LAN1 and LAN2, the
X10DDW-iN has a dedicated IPMI
LAN port located on the I/O backpanel.
The amber LED indicates activity,
while the Link LED indicates the speed
of the connection. See the table on the
right for more information.
Activity LED Link LED
Onboard Power LED
An Onboard Power LED is located at
LE1 on the serverboard. When this
LED is on, the system is on. Be sure
to turn off the system and unplug the
power cord before removing or install-
ing components. See the table on the
right for more information.
Onboard PWR LED Indicator
LED States
LED Color Definition
Off
Normal Power Off (w/
power cable connected)
Green System On
Green:
Flashing
Quickly
ACPI S1 State
BMC Heartbeat LED
A BMC Heartbeat LED is located at
LEDM1 on the serverboard. When
LEDM1 is blinking, the BMC is func-
tioning normally. See the table on the
right for more information.
BMC Heartbeat LED
States
Color/State Definition
Green:
Blinking
BMC: Normal
5-12 SATA Ports
SATA Ports
Ten SATA ports are provided on the serverboard. I-SATA0-3, I-SATA4 and I-SATA5
are supported by the Intel PCH and the S-SATA ports 0-3 are supported by Intel
SCU. Note also that I-SATA4/5, colored in yellow, are used with Supermicro Su-
perDOM (Disk-on-Module) connectors with built-in power-pins. SuperDOMs are
backward-compatible with regular SATA HDDs and SATA DOMs. See the table
on the right for pin definitions.
Notes : For SAS 3.0 support, be sure to install the Mezzanine card on slot JMEZ1
on the serverboard. Refer to Section 5-7 for more information.
For more information on SATA HostRAID configuration, please refer to the Intel SATA
HostRAID User's Guide posted on our website at www.supermicro.com.
5-13 NVMe Ports
Four NVMe Express ports are provided on the serverboard. These NVMe ports
provide PCI-Exp. 3.0 x4 connections. P1_NVME0/1 are supported by CPU1 while
P2_NVME0/1 are supported by CPU2.
The NVM Express ports provide high-speed, low-latency connections directly from
the CPU to NVMe Solid State drives (SSDs). This greatly increases SSD throughput
and significantly reduces storage device latency by simplifying driver and software
requirements resulting from the direct PCI-E interface between the CPU and the
NVMe SSD drives.
IPMI LAN Link LED (Left) &
Activity LED (Right)
Color/State Definition
Link (Left)
Green: Solid 100 Mbps
Amber 1 Gbps
Activity
(Right)
Amber: Blink-
ing
Active