Supermicro SUPERSERVER 6027R-CDNRT+, User Manual

Page: 107 / 128

Chapter 7: BIOS
7-19
Change Settings
This option specifies the base I/O port address and the Interrupt Request address
of COM Port 2. The options are Auto , IO=3F8h; IRQ=4; IO=3F8h; IRQ=3; IO=2F8h;
IRQ=3; IO=3E8h; IRQ=5; IO=2E8h; IRQ=7; IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; and
IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12.
SOL (Serial-Over-LAN) Device Mode
Use this feature to select the desired mode for the serial port specified. The options
are Normal and High Speed.
Serial Port 2 Attribute
Use this feature to select the attribute for serial port 2. The options are SOL (Serial
-Over-LAN) and COM.

Serial Port Console Redirection
•
COM1, COM2/SOL
These two submenus allow the user to configure the following Console Redirection
settings for a COM Port specified by the user.
Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are
Enabled and Disabled. The default setting for COM1 is Disabled ,
and for COM2 is Enabled .

Serial Port Console Redirection
COM1 and SOL
These two submenus allow the user to configure the following Console Redirection
settings for a serial port selected by the user.
COM1 Console Redirection/SOL Console Redirection
Select Enabled to use a serial port selected by the user to be used for Console
Redirection. The options are
Enabled and Disabled. The default setting for COM1
is Disabled , and for SOL is Enabled .

Console Redirection Settings
Use this feature to specify how the host computer will exchange data with the client
computer, which is the remote computer used by the user.