Supermicro SUPERSERVER 6014P-32, User Manual

Page: 50 / 126

5-16
S
UPERSERVER 6014P-32/6014P-32R User’s Manual
SMB
The System Management Bus header
(for the PCI bus) designated J22 is
located near the battery. Connect the
appropriate cable here to utilize SMB
on your system. See the table on the
right for pin defi nitions.
SMB Power (I
2
C)
The header at JS4 is for SMB, which
may be used to monitor the status of
the power supply. See the table on the
right for pin defi nitions.
SMB Header
Pin Defi nitions (J22)
Pin# Defi nition
1 Data
2 Ground
3 Clock
4 No Connection
SMB Power (I
2
C)
Pin Defi nitions (JS4)
Pin# Defi nition
1 Clock
2 Data
3 Power Fail
4 Ground
5 +3.3V
SAS Activity LED Header
The header designated JSLED1 is
used to connect to the backplane to
indicate activity on the SAS ports.
See the table on the right for pin
defi nitions.
SAS Activity LED Header
Pin Defi nitions (JSLED1)
Pin# Defi nition
1 SAS0 Activity
2 SAS1 Activity
3 SAS2 Activity
4 SAS3 Activity
5 SAS Control Signal
6 NC
7 NC
8 NC
9 NC
Note: NC indicates no connection.