Supermicro SUPERSERVER 6014L-T, User Manual

Page: 47 / 120

Chapter 5: Advanced Serverboard Setup
5-11
X6DLP-EG2 Quick Reference
Jumper Description Default Setting
J13/J15 PCI/PCI-X Slots to System SMB Open (Disabled)
JBT1 CMOS Clear See Section 5-9
JPF Power Force On Open (Disabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1/JPL2 JLAN1/JLAN 2 Enable/Disable Pins 1-2 (Enabled)
JPR1 Power Fail Alarm Reset Open (Disabled)
JWD Watch Dog Enable Pins 1-2 (Enabled)
Connector Description
COM1/COM2 COM1/COM2 Serial Port Connector/Header
FAN 1-6 CPU/Chassis Fan Headers
Floppy Floppy Disk Drive Connector
IDE1/IDE2 IDE1/2 Hard Disk Drive Connectors
IPMI IPMI 2.0 Socket
I-SATA0/1 Serial ATA0, Serial ATA1 Connectors
JF1 Front Control Panel Connector
JF2 PWR LED (Pins1-3), Speaker (Pins 5-7)
JL1 Chassis Intrusion Header
JLAN 1/2 G-bit Ethernet Ports
JWOL Wake-on-LAN Header
JWOR Wake-on-Ring Header
Keyboard/Mouse Keyboard and Mouse Ports
Printer Parallel (Printer Port) Header
PW1 Primary 24-pin ATX PWR Connector
PW2 12V 8-pin PWR Connector
PW3 Power SMB (System Management Bus)
PW4 PWR Fault
USB0/1 Universal Serial Bus Ports
USB2/3 Universal Serial Bus Headers
VGA VGA Connector
Onboard Indicators Description
DS1, DS5 Power LED Indicators
DS7-DS8 POST Code LEDs (*See Section 5- & App.A)
DS9 System Status LED