Supermicro SUPERSERVER 6014L-T, User Manual

Page: 111 / 120

Appendix C: Software Installation
C-13
Rebuilding Arrays
Notes:
Rebuilding applies to Fault Tolerant arrays (RAID 1) only.
If an array Build process (or initialization) is interrupted or critical with one member
missing, you must perform a Rebuild to optimized its functionality. For a critical
array Rebuild operation, the optimal drive is the source drive.
If no spare array exists and a hard disk drive fails, you need to create a spare
before you can rebuild an array.
To rebuild an array:
1. From the Main Menu, select Manage Arrays (as shown in the screen below).
From the list of arrays, select the array you want to rebuild.
2. Press Ctrl+R to rebuild.