Supermicro SUPERSERVER 6014A-8, User Manual

Page: 48 / 130

5-12
S
UPER
S
ERVER 6014A-8 Manual
5-8 Connector Definitions
Power LED
The Power LED connection is lo-
cated on pins 15 and 16 of JF1. Re-
fer to the table on the right for pin
definitions.
ATX Power Connector
The serverboard includes a 24-pin
m a i n p o w e r s u p p l y c o n n e c t o r
(J1B1) and a 4-pin CPU PWR con-
nector (J38). These power con-
nectors meet the SSI EPS 12V
specification. You must connect
power supply cables to both J1B1
and J38 as well as to the proces-
s o r p o w e r c o n n e c t o r ( b e l o w ) .
See the table on the right for pin
definitions.
Pin
Number
15
16
Definition
Vcc
Control
PWR LED Pin Definitions
(JF1)
Pins #
1 & 2
3 & 4
Definition
Ground
+12 V
+12V 4-pin Connector
(J38)
Required
Connection
Processor Power
Connector
In addition to the Primary ATX power
connector (above), the 12v 8-pin pro-
cessor power connector at J1D1
must also be connected to your
power supply. (If an 8-pin cable is
not available, please use two 4-pin
cables.) See the table on the right for
pin definitions.
Pins
1 thru 4
5 thru 8
Definition
Ground
+12v
CPU 8-pin PWR
Connector (J1D1)
Required
Connection
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin definitions.
Pin
Number
19
20
Definition
Control
Ground
NMI Button
Pin Definitions (JF1)
Pin # Definition
11 +3.3V
12 -12V
13 COM
14 PS_ON
15 COM
16 COM
17 COM
18 -5V
19 +5V
20 +5V
Pin # Definition
1 +3.3V
2 +3.3V
3 COM
4 +5V
5 COM
6 +5V
7 COM
8 PW -OK
9 5VSB
10 +12V
ATX 20-pin Power Connector
Pin Definitions (J1B1)