Supermicro SUPERSERVER 6013P-i, User Manual

Page: 47 / 102

Chapter 5: Advanced Serverboard Setup
5-13
Overheat LED (OH)
Connect an LED to the OH connec-
tion on pins 7 and 8 of JF2 to pro-
vide advanced warning of chassis
overheating. Refer to the table on
the right for pin definitions.
NIC2 LED
The NIC2 (Network Interface Con-
troller) LED connection is located
on pins 9 and 10 of JF2. Attach
the NIC2 LED cable to display net-
work activity. Refer to the table
on the right for pin definitions.
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF2.
Refer to the table on the right for
pin definitions.
NIC1 LED
The NIC1 (Network Interface Con-
troller) LED connection is located
on pins 11 and 12 of JF2. Attach
the NIC1 LED cable to display net-
work activity. Refer to the table
on the right for pin definitions.
HDD LED
The HDD LED (for IDE Hard Disk
Drives) connection is located on
pins 13 and 14 of JF2. Attach the
IDE hard drive LED cable to these
pins to display disk activity. Refer
to the table on the right for pin
definitions.
HDD L ED Pin
Definitions
(JF 2)
Pin
Number
13
14
Definition
Vcc
HD Active
NIC1 L ED Pin
Definitions
(JF 2)
Pin
Number
11
12
Definition
Vcc
GND
Overheat (OH) LED
Pin Definitions
(JF2)
Pin
Number
7
8
Definition
Vcc
GN D
Power Fail LED Pin
Definitions
(JF 2)
Pin
Number
5
6
Definition
Vcc
GND
NIC2 L ED Pin
Definitions
(JF 2)
Pin
Number
9
10
Definition
Vcc
GND