Supermicro SuperServer 6013P-8, User Manual

Page: 52 / 110

5-16
S
UPERSERVER 6013P-8 User’s Manual
Chassis Intrusion
A Chassis Intrusion header is lo-
cated at JL1. Attach the appropri-
ate cable to inform you of a chas-
sis intrusion.
Third Power Supply Fail
Header
Connect a cable from your power
supply to the JP8 header to pro-
vide warning of power supply fail-
u r e . T h i s w a r n i n g s i g n a l i s
passed through the PWR_LED pin
on JF2 to indicate of a power fail-
ure on the chassis. See the table
on the right for pin definitions.
Note: This feature is only avail-
a b l e w h e n u s i n g r e d u n d a n t
Supermicro power supplies and
so does not apply to the 6013P-8.
T hird Pow er Sup ply Fail Heade r
Pin Definitions (JP8)
Pin
Number
1
2
3
4
Definition
P /S 1 Fail Signal
P /S 2 Fail Signal
P /S 3 Fail Signal
R eset (from MB)
Power LED/Speaker/NMI
On the JDI header, pins 1-3 are
for a power LED, pins 4-7 are for
the speaker and pins 8-9 are for
the NMI connection. See the table
on the right for speaker pin defini-
tions. Note: The speaker connec-
tor pins are for use with an exter-
nal speaker. If you wish to use
the onboard speaker, you should
close pins 6-7 with a jumper.
Speaker Co nnector Pin
Definitio ns (JD1)
Pin
Numb er
4
5
6
7
Function
+
Key
Definition
R ed wire, Speake r data
No connectio n
Key
Speaker data