Chapter 2: Server Installation
20
2.4 Installing the Server into a Rack
The server may be affixed directly to the rack with screws, or can be installed using an
optional sliding rail kit.
The server has two rack mounting "ear" brackets, which are located on each side of the front
of the chassis. To mount the system into a rack, simply screw these brackets directly to the
front of the rack, two screws for each bracket.
Figure 2-1. Identifying the Sections of the Rack Rails
2.5 Installing with a Rail Kit
This is a guideline for installing the unit into a rack with the optional sliding rail kit (MCP-290-
00055-0N). There are a variety of rack units on the market, which may mean the assembly
procedure will differ slightly. Refer also to instructions that came with the rack.
The rail hardware includes two assemblies that consists of two sections: an inner rail that
secures to the chassis and an outer rail that secures to the rack. Note that the rails are left/
right side specific.
