SuperServer 5039MP-H8TNR User's Manual
96
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system event log
is full. Select Erase Immediately to erase all events in the log when the system event log is
full. The options are
Do Nothing
and Erase Immediately.
Note
: After making changes on a setting, be sure to reboot the system for the changes
to take effect.
BMC Network Configuration
BMC Network Configuration
Update IPMI LAN Configuration
Select Yes for the BIOS to implement all IP/MAC address changes at the next system boot.
The options are No and Yes.
*If the feature above is set to Yes, the following features will become available for
user's configuration:
Configure IPv4 Support
This section displays configuration features for IPV4 support.
IPMI LAN Selection
This item displays the IPMI LAN setting. The default setting is
Failover
.
IPMI Network Link Status
This item displays the IPMI Network Link status. The default setting is
Dedicated LAN
.
Configuration Address Source
This feature allows the user to select the source of the IP address for this computer. If Static
is selected, you will need to know the IP address of this computer and enter it to the system
manually in the field. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host
Configuration Protocol) server in the network that is attached to and request the next available
IP address for this computer. The options are
DHCP
and Static.
*If the feature above is set to Static, the following features will become available for
configuration:
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal and in
dotted quad form (i.e., 192.168.10.253).
