SuperServer 5039MC-H12TRF User's Manual
62
DMI De-Emphasis Control
Use this feature to configure the De-emphasis control on DMI. The options are -6dB and
-3.5dB
.
PEG Port Configuration
PEG 0:1:0
PEG0 Enable Root Port
Use this feature to enable or disable the PCI Express Graphics (PEG) device in the port
specified by the user. The options are Disabled, Enabled, and
Auto
.
PEG0 Max Link Speed
Use this item to configure the link speed of a PCI-E port specified by the user. The options
are
Auto
, Gen1, Gen2, and Gen3.
PEG0 Max Payload Size
Select Auto for the system BIOS to automatically set the maximum payload value for a
PCI-E device to enhance system performance. The options are
Auto
, 128 TLP and 256 TLP.
PEG0 Slot Power Limit Value
Use this feature to set the upper limit on the power supplied by the PCIE slot. Press "+"
or "-" on your keyboard to change this value. The default setting is
75
.
PEG0 Slot Power Limit Scale
Use this feature to select the scale used for the slot power limit value. The options are
1.0x
, 0.1x, 0.01x, and 0.001x.
Program PCIe ASPM After OPROM
PCIe ASPM, the Active State Power Management for PCI-Express slots, is a power
management protocol used to manage power consumption of serial-link devices installed
on PCI-Exp slots during a prolonged off-peak time. If this item is set to Enabled, PCI-E
ASMP will be programmed after OPROM. If this item is set to Disabled, the PCI-E ASPM
will be programmed before OPROM. The options are
Disabled
and Enabled.
Memory Configuration
The following memory information will display:
•
Memory RC Version
•
Memory Frequency
•
Total Memory
•
VDD
